汽車零部件在加工時，會出現零件孔與零件內腔存在相貫線毛刺，為了保證零件的正常使用，需要將這些毛刺除去，而使用人工清洗來去毛刺，費時又費力，因此汽車零部件廠家需要一種能去除零件毛刺的加工設備，今天小編就給大家推薦高壓去毛刺清洗機，一起來看看吧。

During the processing of auto parts, there will be intersecting line burrs between the part hole and the part cavity. In order to ensure the normal use of the parts, these burrs need to be removed, and manual cleaning is time-consuming and laborious. Therefore, auto parts manufacturers need a processing equipment that can remove the part burrs. Today, I recommend a high-pressure deburring cleaning machine. Let's have a look.

高壓去毛刺清洗機是主要針對汽車零部件，如：閥體、缸體、曲軸、制動器、變速箱殼體、離合器殼體、ABS閥體、泵體等需要清洗去除毛刺的工件。

High pressure deburring washer is mainly used for cleaning and deburring auto parts, such as valve body, cylinder block, crankshaft, brake, gearbox housing, clutch housing, ABS valve body, pump body and other workpieces.

設備以水為介質，用高50Mpa的高壓水去除工件內部殘留的切削和毛刺，采用0.5秒定位瞬間噴射技術，能有效避免工件損傷，保證工件品質。該設備具有投資少、自動化、環保無污染等優點，并且人工不能處理或很難處理的地方都可以輕松清理掉。

The equipment uses water as the medium, uses 50Mpa high pressure water to remove the residual cutting and burrs inside the workpiece, and uses 0.5 second positioning instantaneous spraying technology to effectively avoid workpiece damage and ensure the workpiece quality. The equipment has the advantages of less investment, automation, environmental protection and pollution-free, and the places that cannot be handled manually or are difficult to handle can be easily cleaned.

高壓去毛刺清洗機的優勢：

Advantages of high-pressure deburring cleaning machine:

1、高壓水射流使用的介質是自來水，來源容易，在清洗過程中，由于能量強大，不需加任何填充物及洗滌劑，即可將毛刺清洗干凈，因此成本很低。其次，節水節能。

1. The medium used by high-pressure water jet is tap water, which is easy to source. In the cleaning process, due to the powerful energy, the burr can be cleaned without any filler or detergent, so the cost is very low. Secondly, save water and energy.

2、速度快，效率高，可以完成人工沒法完成的去毛刺清洗工作。

2. It is fast and efficient, and can complete the deburring and cleaning work that cannot be completed manually.

高壓去毛刺清洗機的特點：

Features of high-pressure deburring and cleaning machine:

1、高精度的點對點清洗

1. High precision point-to-point cleaning

通過CNC的控制，實現了定位精度0.08mm，能更高精度和更好效率的清洗。

Through the control of CNC, the positioning accuracy of 0.08mm is realized, and the cleaning with higher accuracy and better efficiency can be achieved.

2、去除所有切屑和毛刺

2. Remove all chips and burrs

從CNC定位的噴嘴中噴射出高50Mpa的高壓水，能徹底去除交叉孔、深孔、螺紋孔內的切屑和毛刺。

High pressure water of 50Mpa is sprayed from the nozzle positioned by CNC, which can completely remove chips and burrs in cross holes, deep holes and threaded holes.

3、完全實現自動搬送

3. Fully realize automatic transportation

結合起重機架和傳送帶，機器人等實現適合的自動清洗機。

Combined with the lifting frame, conveyor belt, robot, etc. to achieve a suitable automatic cleaning machine.

4、豐富的選配品

4. Rich options

從各種不同清洗噴嘴和去毛刺工具，到各種形式的工作臺、過濾器等，集中了清洗工件適合的選項品。

From various cleaning nozzles and deburring tools, to various forms of workbenches, filters, etc., we have concentrated the options suitable for cleaning workpieces.

5、實現廣泛區域的清洗

5. Cleaning of a wide range of areas

設備寬度保持1500mm不變，X軸形成增加實現至650mm。

The width of the equipment remains unchanged at 1500mm, and the X axis is increased to 650mm.

6、對象工件

6. Object piece

缸體、曲軸、缸體、EV用定子殼體、變速箱殼體、變速箱零件、離合器殼體、ABS閥體、泵體、制動器等。

Cylinder block, crankshaft, cylinder block, stator housing for EV, gearbox housing, gearbox parts, clutch housing, ABS valve body, pump body, brake, etc.

以上就是關于高壓去毛刺清洗機的內容介紹了，希望可以對您有所幫助，如您有定制或購買去毛刺清洗機www.ww416.com的需求，可聯系我們進行詳談。

The above is the introduction of high-pressure deburring cleaning machine. I hope it can help you. If you need to customize or purchase deburring cleaning machine www.ww416.com, you can contact us for detailed discussion.